Color:The color is the same as in the pictures. Made in an ISO 9001 9002 facility to ensure good quality. Easy installed and No modification needed, 3M double tape is attached at the back.Please clean the door sill and dry it before installing. Clean the location of the installation with rubbing alcohol before proceeding. Make sure to remove any grease, wax or dust etc. Please ensure that the product completely fits in in the door sill before proceeding with installation. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting.
Carefully place the product in desired location and press down for about 1-2 minutes, Note: do not wash your car for 24-hours. The adhesive should be cured after 12-hours. When temperature is lower than 15 degrees, please Heat the 3M tape with a hair dryerplease Wipe up need to paste the part. Because the same model car may be differently produced in different country.We understand that sometimes an item may not turn out to be just what you need. DO NOT send without communication. We open Monday to Saturday. We answer every message within 24 hour period.
Our customer service representative is here to ensure that you are satisfied with our services. So yourPOSITIVE FEEDBACK is very important. And welcome back to our store again. The item "For Ford Explorer 2016-2019 Stainless steel rear truck door bottom trim cover" is in sale since Tuesday, February 14, 2017.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Mouldings & Trim". The seller is "modiauto2016" and is located in WUHAN. This item can be shipped worldwide.